TB 9-2320-360-13&P-1
A/C KIT INSTALLATION - CONTINUED
0003 00
FINAL COMPONENT ASSEMBLY - CONTINUED
0003 00
WARN I N G
Always wear gloves and goggles when drilling and grinding. Failure to follow this warning may cause
injury to personnel.
N OT E
The following step does not apply to armored vehicles.
Cut firewall insulation to allow enough clearance for a 5/16-inch diameter mounting hole.
(3)
Install twist bracket (6) on firewall (5) at upper corner of tunnel (7).
(a) Drill a 5/16-inch diameter hole in
firewall (5).
(b) Install twist bracket (6) on firewall
(5) with screw (8) and nut (9), pro-
vided with the kit.
HETF00413
b.
For all vehicles: Install A/C hoses, shutoff valves, and cushion clamps.
N OT E
Refer to WP 0057 00 for A/C Refrigerant Schematic.
(1)
Install #6 O-ring (10) in hose connector (11) of #6 A/C hose (12) from A/C evaporator.
(2)
Install #6 male shutoff valve (13) on #6 A/C hose (12) from A/C evaporator.
(3)
Install #6 O-ring (14) in hose connector (15) of #6 A/C hose (16) to receiver/dryer.
(4)
Install #6 female shutoff valve (17) on #6 A/C hose (16) to receiver/dryer.
(5)
Connect #6 shutoff valves (13 and 17).
HETF00414
0003 00-43