TB 9-2320-360-13&P-1
A/C KIT INSTALLATION - CONTINUED
0003 00
FINAL COMPONENT ASSEMBLY - CONTINUED
0003 00
6.
Condenser Assembly Installation.
WARN I N G
Always wear gloves and goggles when drilling and grinding. Failure to follow this warning may cause
injury to personnel.
CAU T I ON
Use caution when drilling and make sure there are not any components behind drilling surface. Failure to
follow this caution may result in damage to machine.
N OT E
Refer to WP 0057 00, Figure i., for A/C Condenser Assembly Installation Template.
Carefully place a block of wood between radiator and frame to protect radiator during drilling.
a.
Mark and drill a 13/32-inch diameter hole (1) for lower driver side condenser assembly mounting screw as shown
on template.
b.
Mark center lines (2) for lower passenger side condenser assembly mounting hole.
HETF00342
c.
Place condenser assembly (3) in position and
insert screw (4) in mounting hole (6).
d.
Lightly secure screw (4) with locknut (5).
HETF00343
0003 00-41
