TB 9-2320-360-13&P-1
A/C KIT INSTALLATION - CONTINUED
0003 00
FINAL COMPONENT ASSEMBLY - CONTINUED
0003 00
e.
Pivot condenser assembly (3) until passenger side mounting hole (6) lines up with center lines.
f.
Clamp condenser assembly (3) securely to radiator frame (7).
g.
Using a 13/32-inch drill bit, mark center of three mounting holes (6, 8, and 9).
h.
Drill each mounting hole (6, 8, and 9) using a 5/16-inch drill bit first, then complete drilling mounting holes with a
13/32-inch drill bit.
i.
Insert screws (4) in mounting holes (6, 8, and 9).
j.
Lightly secure screws (4) with three locknuts (5).
k.
Tighten four screws (4) and locknuts (5).
449-603
7.
A/C Hoses, Shutoff Valves, and A/C Compressor - Receiver/Dryer Harness Installation.
a.
Install A/C hose bracket.
(1)
Remove driver side lower screw (1) and
washer (2) of windshield-washer bottle
mount (3).
(2)
Install A/C hose bracket (4) on firewall
(5) with original washer (2) and screw
(1).
HETF00412
0003 00-42