TB 9-2320-360-13&P-1
A/C KIT INSTALLATION - CONTINUED
0003 00
FINAL COMPONENT ASSEMBLY - CONTINUED
0003 00
h.
Tilt radiator (3) forward, as much as possible, to gain access to install fan (4).
i.
Install fan (4) on fan spacer (1) and fan clutch assembly (2) with four screws (5) and four lockwashers (6) provided
with the kit (TM 9-2320-360-20).
HETF00338
j.
Remove guide pins (TM 9-2320-360-20).
k.
Tighten fan screws to required torque (TM 9-2320-360-20).
l.
Install side mounting braces in mounting holes on frame of truck (TM 9-2320-360-20).
m.
Install nuts (TM 9-2320-360-20). Do not tighten mounting brackets.
N OT E
The radiator should sit at correct angle (approximately 5 toward rear of vehicle) and fan should clear fan
shroud (TM 9-2320-360-20).
n.
Completely install radiator hardware (TM 9-2320-360-20-2).
o.
Install bottom coolant hose and clamp (TM 9-2320-360-20-2).
p.
Install transmission cooler hoses (TM 9-2320-360-20-2).
q.
Install air horns, if removed (TM 9-2320-360-20-2).
r.
Connect two air lines to air horns (TM 9-2320-360-20-2).
s.
Install two top radiator hoses (TM 9-2320-360-20-2).
0003 00-38
