TB 9-2320-335-13&P
19-3.1. TRANSMISSION/TRANSFER CASE ASSEMBLY REMOVAL
(SERIAL NUMBERS 300000 AND ABOVE) (Cont'd)
NOTE
It will be necessary to rotate flywheel clockwise from capscrew in
front of crankshaft to gain access to capscrews securing torque
converter.
15.
away from flywheel (3).
CAUTION
Safety chain must be routed under transmission oil cooler lines or
damage may result.
16.
Support transmission (7) with transmission jack and secure with safety chain.
17.
Remove two capscrews (23) and lockwashers (24) from transmission adapter (15) and mount (22).
18.
Remove locknut (21), washer (20), capscrew (17), washer (18), and bypass valve (16) from right side
of crossmember (27) and support bracket (19). Discard locknut (21).
19.
Remove locknut (25), washer (26), washer (14), stud (13), and washer (12) from left side of
crossmember (27) and support bracket (11) and lower crossmember (27). Discard locknut (25).
CAUTION
If transmission is lowered too far, geared fan drive damage
will result.
Wood block must completely cover bottom of engine oil pan or
oil pan damage will result.
20.
Lower transmission (7) slightly and support engine under oil pan (10) with block and stand.
21.
Disconnect main vent line (6) from transmission/transfer case vent line (8).
22.
Remove four capscrews (9) and two studs (5) from transmission (7) and engine (4).
19-6