TB 9-2320-335-13&P
19-4.1. TRANSMISSION/TRANSFER CASE ASSEMBLY INSTALLATION
(SERIAL NUMBERS 300000 AND ABOVE) (Cont'd)
13.
Connect two leads (6) to transfer case switch leads (5) on transfer case (4).
14.
Install speedometer sensor (1) on transfer case (4) and tighten nut (3).
15.
Install tie strap (2) on speedometer sensor (1).
16.
Install clamps (9) on sensors (11) and (16) with two washers (8), capscrews (7), and nuts (10).
17.
Connect connectors 495/496 (15) and 497/498 (13) on input speed sensor (11) and output speed
sensor (16).
18.
Connect wiring harness connector (14) on transmission (12).
19.
Install transfer case shift rod (20) on transfer case shift lever (19) with washer (18) and cotter
pin (17).
20.
Install shift rod and trunnion (24) on relay lever (23) with washer (22) and cotter pin (21).
7
1
2
8
9
3
4
10
8
9
6
11
16
5
~
15
12
14
13
19-12