TB 9-2320-335-13&P
19-3.1. TRANSMISSION/TRANSFER CASE ASSEMBLY REMOVAL
(SERIAL NUMBERS 300000 AND ABOVE) (Cont'd)
7.
Remove cotter pin (1), washer (2), and shift rod and trunnion (4) from relay lever (3). Discard cotter
pin (1).
8.
Remove cotter pin (5), washer (6), and transfer case shift rod (8) from transfer case shift lever (7).
Discard cotter pin (5).
9.
Disconnect wiring harness connector (16) from transmission (14).
10.
Disconnect connectors 495/496 (17) and 497/498 (15) from input speed sensor (13) and output speed
sensor (18).
11.
Remove two nuts (12), capscrews (9), washers (10), and clamps (11) from sensors (13) and (18).
12.
Remove tie strap (20) from speedometer sensor (19). Discard tie strap (20).
13.
Loosen nut (21) and remove speedometer sensor (19) from transfer case (22).
14.
Disconnect two leads (24) from transfer case switch leads (23) on transfer case (22).
19-4
