TB 9-2320-335-13&P
19-4.1. TRANSMISSION/TRANSFER CASE ASSEMBLY INSTALLATION
(SERIAL NUMBERS 300000 AND ABOVE) (Cont'd)
5.
Lower transmission (4) and transfer case (5) and remove stand and wood block from under oil pan (8).
6.
Install mount (18) and crossmember (25) on transmission adapter (13) with two lockwashers (22)
and capscrews (21). Tighten capscrews (22) to 65 lb-ft (88 Nm).
7.
Install left side of crossmember (25) on support bracket (9) with washer (10), stud (11), washer (12),
washer (24), and locknut (25).
8.
Install bypass valve (14) and right side of crossmember (25) on support bracket (17) with
washer (16), capscrew (15), washer (17), and locknut (20).
9.
Remove safety chain and lower transmission (4).
10.
Tighten locknuts (22) and (20) to 65 lb-ft (88 Nm).
NOTE
It will be necessary to rotate flywheel clockwise from capscrew in
front of crankshaft to gain assess to capscrews securing torque
converter.
11.
Align torque converter (28) with holes in flywheel (30).
12.
Install torque converter (28) on flywheel (30) with six capscrews (29). Tighten capscrews (29) to
32 lb-ft (43 Nm).
2
1
3
4
~
7
8
5
6
15
14
26
13
27
16
12
11
4
17
9
10
18
19
25
20
28
24
22
30
21
23
29
19-11