TB 9-2320-335-13&P
6-20.1. STABILIZER BAR REPLACEMENT (SERIAL NUMBERS 3000000 AND ABOVE)
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Equipment Condition
General mechanic's tool kit:
Stabilizer bar link removed
automotive (Appendix B, Item 1)
(TM 9-2320-387-24-1)
Maintenance and repair shop equipment:
Maintenance Level
automotive (Appendix B, Item 2)
Unit
Manual References
TB 9-2320-335-13&P, Appendix E
a. Removal
1.
Remove four capscrews (5), washers (4), two clamps (3), and stabilizer bar (6) from two
frame brackets (1).
2.
Remove two stabilizer bar bushings (2) from stabilizer bar (6).
b. Installation
1.
Install two stabilizer bar bushings (2) on stabilizer bar (6).
2.
Install stabilizer bar (6) on two frame brackets (1) with two clamps (3), four washers (4), and
capscrews (5). Tighten capscrews (5) to 3947 lb-ft (5363 Nm).
1
2
3
6
4
5
6-15/(6-16 blank)