TB 9-2320-335-13&P
7-2.1. SERVICE BRAKE SYSTEM BLEEDING INSTRUCTIONS
(SERIAL NUMBERS 300000 AND ABOVE) (Cont'd)
1.
Install pressure tank hose (2) on master cylinder reservoir cap (3).
2.
Connect short piece of hose (8) to bleeder screw (7) on brake caliper (10) and place other end of
hose (8) in container full of brake fluid (9).
3.
Open valve (4) on line (2) from pressure tank (5) to master cylinder reservoir (1) allowing
pressurized brake fluid to enter system.
4.
Open bleeder screw (7) turn and observe brake fluid in container (9). Close bleeder screw (7)
when brake fluid flows free of bubbles.
5.
Disconnect hose (8) from bleeder screw (7).
6.
Close valve (4) on line (2) from pressure tank (5) to master cylinder reservoir (1).
7.
Disconnect pressure tank hose (2) from master cylinder reservoir cap (3).
8.
Repeat pressure bleeding for opposite side (6) of same brake caliper (10).
9.
Fill master cylinder reservoir (1) with silicone brake fluid to MAX line.
2
7
6
3
1
8
4
10
9
5
PRESSURE
TANK
7-3
