TB 9-2320-335-13&P
6-14.1. FRONT DIFFERENTIAL VENT LINE REPLACEMENT
(SERIAL NUMBERS 300000 AND ABOVE)
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Manual References
General mechanic's tool kit:
TB 9-2320-335-13&P, Appendix E
automotive (Appendix B, Item 1)
Maintenance Level
Materials/Parts
Unit
Lockwasher (Appendix A, Item 144)
a. Removal
1.
Disconnect vent line (2) from tee fittings (1) and (5).
2.
Pull vent line (2) through clamps (3) and (4).
3.
Disconnect vent line (7) from tee fitting (5) and vent line adapter (8).
4.
Remove vent line adapter (8) from differential (9).
5.
Disconnect vent line (6) from tube adapter (14) and tee fitting (5).
6.
Remove nut (10), lockwasher (11), clamp (12), and vent line (6) from crossmember (13).
Discard lockwasher (11).
b. Installation
1.
Install clamp (12) and vent line (6) on crossmember (13) with lockwasher (11) and nut (10).
2.
Connect vent line (6) to tube adapter (14) and tee fitting (5).
3.
Install vent line adapter (8) on differential (9).
4.
Connect vent line (7) to vent line adapter (8) and tee fitting (5).
5.
Pull vent line (2) through clamps (4) and (3).
6.
Connect vent line (2) to tee fittings (5) and (1).
6-12
