TB 9-2320-335-13&P
6-7. HALFSHAFT MAINTENANCE (Cont'd)
d. Wear Sleeve Installation
NOTE
When installing wear sleeve over halfshaft spline, ensure wear
sleeve does not come into contact with splines.
Using a pipe or like item (11.4), slide wear sleeve (11.3) over halfshaft spline (11.2) until flange (11.5) of
wear sleeve (11.3) contacts shoulder adjacent to halfshaft seal surface (11.1).
11.1
11.2
11.3
11.4
11.5
6.00 IN.
2.063 IN.
(152.4 MM
(52.4 MM) I.D.
e. Assembly
1.
Pack outer joint (8) with lithium grease.
2.
Install outer boot (6) on shaft (7). Ensure boot (6) seats in groove of shaft (7).
3.
Secure outer boot (6) on shaft (7) with clamp (4).
4.
Install outer boot (6) on joint (8). Ensure boot (6) seats in groove of joint (8).
5.
Secure outer boot (6) on joint (8) with clamp (5).
6.
Clamp shaft (7) in soft-jawed vise.
7.
Position clamps (3) and (2) on shaft (7).
8.
Install inner boot (1) on shaft (7). Push boot (1) past groove on shaft (7).
1
2
3
4
5
6
7
8
6-9