TB 9-2320-335-13&P
3-64.1. RADIATOR SUPPORTS REPLACEMENT (SERIAL NUMBERS 300000 AND ABOVE)
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Manual References
General mechanic's tool kit:
TB 9-2320-335-13&P, Appendix E
automotive (Appendix B, Item 1)
Equipment Condition
Maintenance and repair shop equipment:
Engine left splash shield removed
automotive (Appendix B, Item 2)
Materials/Parts
Engine right splash shield removed
Two lockwashers (Appendix A, Item 144)
Two locknuts (Appendix A, Item 106)
Maintenance Level
Two lockwashers (Appendix A, Item 146)
Unit
NOTE
Replacement procedures for left and right radiator support brackets
are basically the same. This procedure shows the left side.
a. Removal
NOTE
Perform step 1 for left side only.
1.
Remove two capscrews (14), lockwashers (13), washers (12), and pressure valve bracket (15) from
bracket (3). Discard lockwasher (13).
2.
Remove two locknuts (6), washers (7), capscrews (10), lockwashers (9), and washers (8) from airlift
bracket (11). Discard locknuts (6) and lockwashers (9).
3.
Remove nut (1), washer (2), bracket (3), and support bracket (4) from radiator support (5).
b. Installation
1.
Install support bracket (4) on radiator support (5) with bracket (3), washer (2), and nut (1).
2.
Secure support bracket (4) to airlift bracket (11) with two washers (8), lockwashers (9), capscrews (10),
washers (7), and locknuts (6).
NOTE
Perform step 3 for left side only.
3.
Install pressure valve bracket (15) on bracket with two washers (12), lockwashers (13), and
capscrews (14).
3-30