Freightliner M915 / M916 -
Installation Manual P/N 0257550622-00
Crew Protection Kit
(Doc No.: II113500-1 D)
7.8 Relocate Engine Check Connector (M915-A2 and M916-A1)
This step can be performed after all of the steps the main installation sequence are completed.
7.8.1 Fasteners
Fasteners: (see Figure 7-13)
Find No.
(Table 3-5) Description
Size
Quantity
59
Screw
#10 x 3/4"
1
60
Nut, Hex, Self Locking
#10
1
61
Flat Washer
#10
2
1) Drill a new 13/64" hole in the diagnostic switch bracket 1" to the left of the existing
mounting hole (See Figure 7-13).
2) Thread the existing fastener through the new hole and mount the bracket through the lower
dash cover to the support brace.
3) Drill a 13/64" hole up through the lower dash cover using the original mounting hole as a
template.
4) Secure in this location with new fasteners provided (See Figure 7-13).
Figure 8-14. Engine Check Bracket Installation.
Page 125 of 125