TB 9-2320-279-13&P-4
0061
4
1
3
2
ROLLER SHOWN REMOVED FOR CLARITY
Figure 1.
END OF TASK
INSTALLATION
NOTE
To ensure good electrical grounding, remove paint in a 1 in. (2.54 cm) diameter area around
mounting holes on rear side of taillight bracket and front side of crossmember.
Driver side and passenger side taillight brackets are installed the same way. Passenger side
shown.
1. Install passenger side taillight bracket (3) on crossmember (4) with two screws (2) and locknuts (1).