TB 9-2320-279-13&P-4
0060
9
13
1
3
5
7
2
4
6
8
10
11 12
14
Figure 1.
2. Disconnect wire 1004 (3) from connector (4).
3. Disconnect wire 1008 (5) from connector (6).
4. Disconnect wire 1024 (7) from connector (8).
5. Disconnect wire 1435 (9) from connector (10).
6. Remove two screws (11), lockwashers (12), composite taillight (13), and wire 1435 (9) from bracket (14). Discard
lockwashers.
END OF TASK
INSTALLATION
NOTE
Connect wires and connectors, as noted prior to removal.
Driver side and passenger side composite taillights are installed the same way. Passenger side
shown.
Install cable ties as required.
1. Install composite taillight (13) and wire 1435 (9) on bracket (14) with two lockwashers (12) and screws (11).
