TB 9-2320-279-13&P-4
0059
NOTE
Note position of lockout ring and cover prior to removal to ensure proper installation.
8. Remove four screws (10), washers (11), cover (12), spring pin (13), and lockout ring (14) from hub (7). Discard
spring pin.
END OF TASK
ASSEMBLY
NOTE
Install lockout ring and cover as noted prior to removal.
1. Install cover (12) and lockout ring (14) on hub (7) with four washers (11), screws (10), and spring pin (13).
9
7
14
4
12
11
10
6
13
8
Figure 3.
2. Install bushing (9) on side mount (8). Apply grease to inside surface of bushing (9).
3. With the aid of an assistant, install side mount (8) on rocker arm (4).