TB 9-2320-279-13&P-4
0051
2. With the aid of an assistant and lifting device, remove ten locknuts (2), screws (3), and ramp assembly (1) from
frame (4). Discard locknuts.
3. Set ramp assembly (1) down with ramp flats down, and remove lifting device from ramp assembly (1).
4. Remove four locknuts (5), screws (6), and rear ramp support bracket (7) from ramp assembly (1). Discard
locknuts.
9
6
10
7
8
5
Figure 2.
5. Remove six locknuts (8), screws (9), and front support angle (10) from ramp assembly (1). Discard locknuts.
END OF TASK
INSTALLATION
1. Install front support angle (10) on ramp assembly (1) with six screws (9) and locknuts (8).
