TB 9-2320-279-13&P-4
0050
2. Remove two locknuts (6), screws (7), washers (8), and mounting bracket (3) from fender (4). Discard locknuts.
END OF TASK
INSTALLATION
1. Install mounting bracket (3) on fender (4) with two washers (8), screws (7), and locknuts (6).
7
8
6
5
3
1
4
2
Figure 2.
2. Install screw (2) and locknut (1) on fender brace (5), fender (4), and mounting bracket (3).
END OF TASK
FOLLOW-ON MAINTENANCE
1. Install winch cable hold down control valve. (WP 0056)
2. Install Winch KickOut control valve. (WP 0055)
3. Install high idle switch. (WP 0063)
4. Install winch remote control connector. (WP 0062)
END OF WORK PACKAGE
