TM 9-2320-363-34-2
17.
18.
19.
20.
21.
22.
USING DOWEL INSTALLER, INSTALL DIAMOND DOWEL (19) AND ROUND DOWEL (20) IN REAR
FACE OF CYLINDER BLOCK TO HEIGHT OF 0.472 ±0.020 IN. (12.0 ±0.5 mm). ANGULAR
ORIENTATION OF DIAMOND DOWEL MUST BE PERPENDICULAR TO CENTERLINE (21) THRU
ROUND AND DIAMOND DOWELS WITHIN ±4 DEGREES.
USING DOWEL INSTALLER, INSTALL DIAMOND DOWEL (22) IN FRONT FACE OF CYLINDER
BLOCK TO HEIGHT OF 0.472 0.020 IN. (12.0 0.5 mm). ANGULAR ORIENTATION OF DIAMOND
DOWEL MUST BE PERPENDICULAR TO CENTERLINE (23) THRU BULL GEAR PILOT BORE (24)
AND DIAMOND DOWEL WITHIN 4 DEGREES.
INSTALL AIR COMPRESSOR OIL SUPPLY LINE ELBOW.
INSTALL AIR COMPRESSOR COOLANT SUPPLY ELBOW.
INSTALL SIX WEEP HOLE PLUGS.
PERFORM CYLINDER BLOCK PRESSURE TESTING, PAGE 12-88.
Install
Install
Install
Install
Install
Install
Install
Install
Install
Install
Install
Install
Install
Install
NOTE
Follow-on Maintenance:
crankshaft (page 12-41).
piston and cylinder assembly (page 12-141).
cylinder head (page 3-80).
gear housing assembly (page 12-68).
oil cooler, core, and oil filter adapter (TM 9-2320-363-20).
oil bypass filter adapter and tube (TM 9-2320-363-20).
oil fill tube (TM 9-2320-363-20).
oil dipstick and tube (TM 9-2320-363-20).
bypass filter adapter (TM 9-2320-363-20).
fuel pump and lines (TM 9-2320-363-20).
fuel filter adapters (TM 9-2320-363-20).
electronic control module (TM 9-2320-363-20).
engine wiring harness (TM 9-2320-363-20).
oil temperature and oil pressure sending units (TM 9-2320-363-20).
12-87
