TM9-2320-363-34-2
CYLINDER BLOCK ASSEMBLY REPAIR (CONT)
M915A2 AND M916A1
ALL EXCEPT AND M916A1
RIGHT SIDE - REAR
6.
IF DAMAGED, PIERCE CUP PLUG(S) (5) WITH SCREWDRIVER OR CHISEL. REMOVE AND
DISCARD PLUG(S).
7.
ON M915A2 AND M916A1, REMOVE SIX PIPE PLUGS (6, 7, AND 8) AND DRAINCOCK (9).
7.1.
ON ALL EXCEPT M915A2 AND M916A1. REMOVE SEVEN PIPE PLUGS (6,7,8. AND 8.1) AND
STUD (9.1).
M915A2 AND M916A1
ALL EXCEPT M915A2 AND M916A1
LEFT SIDE - FRONT
8.
POSITION CYLINDER BLOCK TO VIEW LEFT SIDE.
9.
REMOVE TWO (M915A2 AND M916A1) OR THREE (ALL EXCEPT M915A2 AND M916A1) PIPE
PLUGS (10).
10.
REMOVE AIR COMPRESSOR OIL SUPPLY LINE ELBOW (11).
12-80
Change1
