TM 9-2320-363-34-2
A I R C O N D I T I O N E R E V A P O R A T O R C O I L R E P L A C E M E N T ( C O N T )
1.
REMOVE THE DASH SKIRT PANELS.
a.
REMOVE NINE SCREWS (1) AND
COVER (2) UNDER GLOVE BOX.
b.
REMOVE THE FIVE FASTENERS
T H A T A T T A C H T H E T W O
PANELS ON THE RIGHT SIDE
OF THE ELECTRICAL ACCESS
PANEL, THEN REMOVE THE
PANELS.
c.
REMOVE
THE
THREE
FASTENERS THAT ATTACH THE
PANEL ON THE LEFT SIDE OF
THE ELECTRICAL ACCESS
PANEL, THEN REMOVE THE
PANEL.
d.
REMOVE THREE SCREWS AND ELECTRICAL ACCESS PANEL. REMOVE THE SIX
FASTENERS THAT ATTACH THE ELECTRICAL ACCESS PANEL SUPPORT BRACKET
TO THE CAB TUNNEL, THEN REMOVE THE BRACKET.
2.
REMOVE THESE ADDITIONAL DASH PANELS.
a.
REMOVE THREE CAPSCREWS UNDER THE CENTER DASH CONSOLE (ABOVE
THE ELECTRICAL ACCESS PANEL).
b.
REMOVE THE THREE SCREWS THAT ATTACH THE KICK PANEL LOCATED
JUST TO THE RIGHT OF THE ACCELERATOR PEDAL. REMOVE THE PANEL.
c.
MOVE THE WIRING AS NEEDED TO ACCESS AND REMOVE THE SCREW THAT
SECURES THE UNDER DASH COVER.
d.
REMOVE THE TWO BOTTOM SCREWS THAT ATTACH THE HEATER AND AIR
CONDITIONER CONTROL PANEL TO THE DASH.
e.
MOVE THE UNDER DASH PANEL TO ALLOW ACCESS TO THE HEATER CORE
COVER.
f.
REMOVE TWO SCREWS INSIDE THE GLOVE BOX AND REMOVE THE TOP
PANEL FROM THE ASSEMBLY. REMOVE THE THREE NUTS AND SPRING
WASHERS INSIDE THE BOX. DISCONNECT THE TWO FLEX HOSES FROM THE
DUCTS AT THE BACK OF THE GLOVE BOX.
g.
DISCONNECT THE BLUE AIR LINE FROM THE AIR CYLINDER AT THE BACK OF
THE GLOVE BOX. REMOVE THE GLOVE BOX.
25-48
Change 1
