TM 9-2320-363-34-2
4.
5.
6.
PULL RUBBER BOOT THROUGH
FIREWALL FROM ENGINE SIDE.
ON ENGINE SIDE OF FIREWALL, APPLY
SEALANT TO FRESH AIR DUCT
ASSEMBLY (5) AND SECURE WITH SIX
SCREWS (6).
SLIDE DRAIN TUBES (7) THROUGH
OPENINGS IN CAB FLOOR (8).
7.
8.
CONNECT DRAIN TUBES (7) AND
SECURE WITH TWO HOSE CLAMPS (9).
INSTALL HEATER CORE HOSES (10) AND
TIGHTEN TWO HOSE CLAMPS (11).
Change 1
25-43
