TM 9-2320-363-34-2
BLOWER MOTOR ASSEMBLY REPLACEMENT
This task covers: a. Removal b. Cleaning c. lnspection d. Installation
Tools and Special Equipment:
Shop Equipment, SC 4910-95-CL-A31
Tool Kit, SC 5180-90-CL-N05
Materials/Parts:
Screw, Sems
References:
TM 9-2320-363-20
Equipment Condition:
Reference
Condition Description
TM 9-2320-363-20
Heater Removed from
Vehicle
1.
REMOVE
2.
REMOVE
FOUR SCREWS (1) AND GUARD (2) FROM HEATER (3).
NUT (4) AND COMBUSTION TUBE ASSEMBLY (5) FROM HEATER (3) AND BLOWER
MOTOR ASSEMBLY (6).
3.
REMOVE SEMS SCREW (7) AND DISCONNECT
BOARD (9). DISCARD SEMS SCREW.
WIRE (8) FROM TERMINAL NO. 6 ON TERMINAL
Scribe line on blower motor
installation.
NOTE
assembly and heater prior to removal to aid in
4.
LOOSEN
BLOWER
FOUR NUTS (10), TURN BLOWER MOTOR ASSEMBLY (6) TO LEFT, AND REMOVE
MOTOR ASSEMBLY (6) FROM HEATER (3).
Use general methods to clean all parts (page 2-30).
Inspect all parts for wear or damage.
25-26
