TM 9-2320-363-34-2
HYDRAULIC MOTOR REPAIR (CONT)
DISASSEMBLY
1.
REMOVE FOUR SCREWS (1), FOUR LOCK WASHERS (2),
WASHERS.
2.
REMOVE THRUST PLATE (4), SIX POCKET SEALS (5), TWO
DISCARD POCKET SEALS.
AND COVER (3). DISCARD LOCK
BEARINGS (6), AND BUSHING (7).
3.
REMOVE HOUSING (8), TWO SEALS (9), AND TWO MACHINED GEARS (10). DISCARD SEALS.
4.
REMOVE THRUST PLATE (11), SIX POCKET SEALS (12), TWO BEARINGS (13), BUSHING (14),
SNAP RING (15), SPACER (16), AND SEAL (17). DISCARD SEALS.
5.
REMOVE TWO THREADED CHECK ASSEMBLIES (18) FROM COVER (19).
23-10
