TM 9-2320-363-34-2
3.
4.
C A U T I O N
Shaft must be pressed in with splined end up. Failure to do so will cause
damage to components.
USING SUITABLE PRESS, INSTALL TWO KEYS (6) AND SHAFT (7) IN DRUM (8) AS SHOWN.
INSTALL TWO NEW LOCK WASHERS (9) AND TWO SCREWS (10) IN DRUM (8).
5.
6.
USING SUITABLE HOIST, LIFT DRUM (8) AND INSTALL MOTOR END SUPPORT (5) AND GEAR
END SUPPORT (11) AS SHOWN.
INSTALL CLAMP (12) AND TWO SCREWS (13).
23-7
