TM 9-2320-363-34-2
16.
17.
18.
19.
PLACE PIECE OF PLASTIGAUGE (9) ALONG FULL WIDTH IN BEARING SHELL (10) IN MAIN
BEARING CAP (11) ABOUT 1/4 IN. (6.35 mm) OFF CENTER.
INSTALL SEVEN MAIN BEARING CAPS (11).
INSTALL 14 WASHERS (12) AND 14 MAIN BEARING CAP BOLTS (13). TIGHTEN MAIN BEARING
CAP BOLTS TO 347-391 LB-FT (470-530 N.m).
NOTE
Flattened plastigauge will be found adhering to bearing shell or crankshaft.
REMOVE 14 MAIN BEARING CAP BOLTS (13) AND 14 WASHERS (12).
12-51
