TM9-2320-363-34-2 Section  I.  TRANSFER  CASE  REPAIR OVERVIEW This  section  illustrates  and  describes  procedures  for  disassembly,  cleaning,  inspection,  repair,  and assembly  of  the  transfer  case. Repair  of  the  transfer  case  is  general  support  maintenance. TRANSFER  CASE  REPAIR This  task  covers: a.   Disassembly b.  Cleaning c.  Inspection  d.  Repair e. Assembly INITIAL SETUP Applicable Configuration: All except M915A2 Tools  and  Special  Equipment: Shop   Equipment,   SC   4910-95-CL-A31 Tool Kit, SC 5180-90-CL-N05 Fabricated  Tool,  Appendix  C,  Item  1 Materials/Parts: Washer,  Lock  (2) P/N   354AX Washer,  Lock  (50) Oil,  Lubricating P / N    3 5 5 A X Appendix   B,   Item   37 Adhesive-Sealant Appendix   B,   Item   3 Grease,  Automotive Appendix B. Item 26 and  Artillery  (GAA) Compound.  Pipe Compound.  Pipe Sealing Appendix   B.   Item   16 Appendix   B,   Item   15 Loctite  242 Appendix   B,   Item   33 Personnel  Required:  (2) References: TM9-2320-363-20 Equipment    Condition: Reference Condition Description Page  3-263 Transfer   Case   Removed TM9-2320-363-20 Breather  Removed TM9-2320-363-20 Page  3-274 Speed   Sensor   Removed Transfer  Case  Yokes  and Oil Seals Removed Page  3-270 Air Shift Chamber Removed Page  3-276 Lubrication  Pump Removed General   Safety   Instructions: WARNING Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and  are  harmful  to  skin  and  clothing.  To  avoid injury or death, keep away from open fire and use   in   well-ventilated   area. If  adhesive, solvent, or sealing compound gets on skin or clothing,   wash   immediately   with   soap   and water. 15-2 Change  1