TM9-2320-363-34-2
TRANSFER CASE REPAIR (CONT)
13.
REMOVE INNER SPRING (36) FROM TRANSFER CASE REAR HALF (24).
14.
15.
16.
REMOVE DETENT BALL (37) FROM INSIDE TRANSFER CASE FRONT HALF (35).
REMOVE SHIFT ROD (38), EIGHT SPRING DISCS (39), AND SPACER (40).
USING SUITABLE LIFTING DEVICE, REMOVE INPUT SHAFT ASSEMBLY (41), SHIFT ROD
ASSEMBLY (42), AND CENTER SHAFT ASSEMBLY (43) FROM TRANSFER CASE FRONT HALF
(35).
NOTE
Perform step 16.1 for M916A2. M917A1, and M917A1 w/MCS.
16.1.
REMOVE TWO CAPSCREW (43.1) AND SPEEDOMETER SENSOR RING (43.2) FROM END OF
CENTER SHAFT ASSEMBLY (43).
1 5 - 6
Change 1
