TM 9-2320-363-34-2
SECOND CLUTCH REPLACEMENT AND REPAIR (CONT)
3.
CUT, REMOVE, AND DISCARD FOUR RETAINING RINGS (5).
4.
REMOVE CLUTCH RING (6) FROM SECOND CLUTCH PISTON (1),
5.
REMOVE 20 PISTON RELEASE SPRINGS (7) FROM SECOND CLUTCH PISTON (1).
Use general cleaning methods to clean all parts (page 2-30).
1.
INSPECT ALL PARTS FOR WEAR OR DAMAGE.
2.
REPLACE PISTON RELEASE SPRINGS IF ANY 3 IN EACH SET OF 20 DO NOT MEET FOLLOWING
LOAD-HEIGHT REQUIREMENTS:
LENGTH WITHOUT LOAD: AT LEAST 1.29 IN. (32.7 mm).
LENGTH UNDER LOAD: AT LEAST 0.82 IN. (20.8 mm) WITH LOAD OF 4.3-5.7 LB (1.95-2.59 kg).
Use general repair methods to repair damaged parts (page 2-33).
14-154
