TM 9-2320-363-34-2
1.
SET SECOND CLUTCH PISTON (1) IN REAR CAVITY OF
2.
INSTALL 20 PISTON RELEASE SPRINGS (3) IN SECOND
CENTER
CLUTCH
3.
INSTALL CLUTCH RING (4) ON SECOND CLUTCH PISTON (1).
SUPPORT HOUSING (2).
PISTON (1).
C A U T I O N
Clutch ring must be pushed completely down in center support housing while
installing retaining rings, or clutch clearance will be wrong.
4.
INSTALL FOUR NEW RETAINING RINGS (5).
5.
REMOVE SECOND CLUTCH PISTON (1) FROM CENTER SUPPORT HOUSING (2).
6.
STACK 13 CLUTCH PLATES (6 AND 7) ON FLAT SURFACE OF PRESS STARTING WITH STEEL
PLATE (6) AND ALTERNATING WITH FRICTION PLATE (7).
7.
PLACE SECOND CLUTCH PISTON (1) ON TOP OF CLUTCH PLATES (6 AND 7).
14-155
