TM 9-2320-363-34-2
SPINDLE AND HOUSING REPAIR (CONT)
15.
16.
17.
18.
I
C A U T I O N
I
Use pieces of wood or similar soft material to protect fan spindle from vise
damage.
SECURE FAN SPINDLE (2) IN VISE. INSTALL SPACER (13) AND SPACER RETAINING BOLT (14)
IN SPINDLE HOUSING (6). TIGHTEN BOLT TO 43-54 LB-FT (58-73 N.m).
W A R N I N G S
Adhesives, solvents, and sealing compounds can burn easily, can give off
harmful vapors, and are harmful to skin and clothing. To avoid injury or
death, keep away from open fire and use in well-ventilated area. If adhesive,
solvent, or sealing compound gets on skin or clothing, wash immediately with
soap and water.
COAT EDGE OF NEW CUP PLUG (15) WITH NON-HARDENING SEALANT. USING
INSTALLING TOOL (7), PRESS NEW CUP PLUG (15) IN SPINDLE HOUSING (6)
CENTER OF CUP PLUG (15) IS FLUSH WITH EDGE OF SPINDLE HOUSING (6).
INSTALL LUBE PRESSURE RELIEF FITTING (16).
INSTALL GREASE FlTTING (17) AND TIGHTEN TO 6 LB-FT (8.0 N.m) MINIMUM.
FLAT SIDE OF
UNTIL RAISED
12-218
