TM 9-2320-363-34-2
SPINDLE AND HOUSING REPAIR (CONT)
3.
4.
5.
NOTE
Make sure snap ring is fully seated in groove of fan spindle.
INSTALL INNER ROLLER BEARING SNAP RING (4) IN GROOVE OF FAN SPINDLE (2).
PACK NEW ROLLER BEARING (5) WITH LITHIUM BASE MULTIPURPOSE GREASE.
SUPPORT SPINDLE HOUSING (6) ON PRESS BED AND INSTALL ROLLER BEARING (5) IN
SPINDLE HOUSING (6). USING STEPPED SIDE OF INSTALLING TOOL (7), PRESS ROLLER
BEARING (5) AGAINST SHOULDER OF SPINDLE HOUSING (6).
12-214
