TM 9-2320-363-34-2
Make sure snap
6.
INSTALL ROLLER BEARING
NOTE
ring is fully seated in groove of spindle housing.
RETAINING SNAP RING (8) IN GROOVE OF SPINDLE HOUSING (6).
7.
8.
C A U T I O N
Be careful when installing oil seal. Excessive pressure in seating oil seal may
deform oil seal case.
USING SMOOTH SIDE OF INSTALLING TOOL (7), PRESS NEW OIL SEAL (9) IN SPINDLE
HOUSING (6) AGAINST ROLLER BEARING RETAINING SNAP RING (8).
LUBRICATE LIP OF OIL SEAL (9) WITH CLEAN ENGINE LUBRICATING OIL.
12-215
