TM 9-2320-363-34-2
6.
REMOVE THREE LOCK NUTS (19) AND THREE SCREWS (20). DISCARD LOCK NUTS.
C A U T I O N
If drive end housing binds, tap gently on mounting ears. Make sure drive
end housing separates from stator and stator remains attached to slip ring
end housing to avoid damage to stator leads.
7.
REMOVE ROTOR AND DRIVE END HOUSING (21) FROM STATOR (22) AND SLIP RING END
HOUSING (23).
8.
REMOVE AND DISCARD THREE TENZ NUTS (24). DISCONNECT THREE LEADS (25) AND
REMOVE STATOR (22). PROCEED TO STATOR TEST (PAGE 13-11).
13-5
