TM 9-2320-363-34-1
1.
2.
3.
4.
5.
6.
7.
8.
NOTE
Steps 1 thru 8 are for right
Steps 9 thru 17 are for ieft
side only.
side only.
INSTALL STIFFENER (1), TWO WASHERS (2), TWO CAPSCREWS (3), TWO WASHERS (4), AND
TWO NUTS (5).
WARNING
Frame rail reinforcement weighs 100 lb (45.4 kg). Use minimum of three
personnel to install parts on frame raii reinforcement. Failure to do so could
result in injury to personnel.
WITH TWO PERSONNEL HOLDING FRAME RAIL REINFORCEMENT (6), INSTALL TWO WASHERS
(7), TWO CAPSCREWS (8), TWO WASHERS (9), AND TWO NUTS (10) HAND-TIGHT.
INSTALL FRAME RAIL EXTENSION (11) BETWEEN FRAME RAIL (12) AND FRAME RAIL
REINFORCEMENT (6).
INSTALL SIX WASHERS (13), SIX CAPSCREWS (14), SIX WASHERS (15), AND SIX NUTS (16). DO
NOT TIGHTEN NUTS.
REMOVE TWO NUTS (10), TWO WASHERS (9), TWO CAPSCREWS (8), AND TWO WASHERS (7).
INSTALL TRANSMISSION COOLER MOUNTING PLATE (17) BETWEEN FRAME RAIL (12) AND
FRAME RAIL REINFORCEMENT (6).
INSTALL BRACKET (18), FIVE WASHERS (7), FIVE CAPSCREWS (8), FIVE WASHERS (9), AND
FIVE NUTS (10).
TIGHTEN NUTS (10 AND 16).
8-5
