TM 9-2320-363-34-1
STEERING GEAR REPLACEMENT (CONT)
1.
2.
3.
4.
5.
INSTALL TWO NEW PACKINGS (1), TEE (2), AND ELBOW (3) ON STEERING GEAR (4).
NOTE
Support steering gear during installation.
INSTALL STEERING GEAR (4), NEW LOCK WASHER (5), AND SCREW (6).
INSTALL TWO WASHERS (7), TWO SCREWS (8), TWO WASHERS (9), AND TWO NEW LOCK
NUTS (10). TIGHTEN LOCK NUTS TO 344-466 LB-FT (466-632 N.m).
W A R N I N G
S p i l l e d p o w e r s t e e r i n g f l u i d i s v e r y s l i p p e r y . W i p e u p a n y s p i l l e d f l u i d
immediately. Failure to do so could result in serious injury to personnel.
CONNECT TWO HOSES (11) ON STEERING GEAR (4).
CONNECT LOWER UNIVERSAL SHAFT (12) TO STEERING GEAR (4) AND INSTALL BOLT (13)
AND NEW LOCK NUT (14).
NOTE
Follow-on Maintenance:
Install drag link (TM 9-2320-363-20).
Fill power steering reservoir (TM 9-2320-363-20).
7-6
Change 1