TM 9-2320-363-34-1
1.
2.
3.
4.
5.
6.
7.
8.
9.
REMOVE NUT (1) AND
NOTE
Steps 1 thru 9 are for left side only.
Steps 10 thru 16 are for right side only.
CLAMP (2) FROM POWER STEERING RESERVOIR PLATE (3),
NOTE
Note position of capscrews prior to removal to aid in installation.
REMOVE SIX NUTS (4), SIX WASHERS (5), SIX CAPSCREWS (6), AND SIX WASHERS (7).
REMOVE POWER STEERING RESERVOIR PLATE (3) FROM BETWEEN FRAME RAIL
REINFORCEMENT (8) AND FRAME RAIL (9).
INSTALL ANY TWO WASHERS (7), TWO CAPSCREWS (6), TWO WASHERS (5), AND TWO NUTS
(4) HAND-TIGHT IN FRAME RAIL REINFORCEMENT (8) AND FRAME RAIL (9).
REMOVE TWO NUTS (10), TWO WASHERS (11), AND TWO SCREWS (12).
REMOVE THREE NUTS (13), THREE WASHERS (14), THREE CAPSCREWS (15), AND THREE
WASHERS (16).
REMOVE FRAME RAIL EXTENSION (17) FROM BETWEEN FRAME RAIL REINFORCEMENT (8)
AND FRAME RAIL (9).
W A R N I N G
Frame rail reinforcement weighs 100 lb (45.4 kg). Use minimum of three
personnel to remove parts from frame rail reinforcement. Failure to do so
could result in injury to personnel.
WITH TWO PERSONNEL HOLDING FRAME RAIL REINFORCEMENT (8), REMOVE TWO NUTS (4),
TWO WASHERS (5), TWO CAPSCREWS (6), TWO WASHERS (7), AND FRAME RAIL
REINFORCEMENT (8).
NOTE
In steps 9 and 10, note position of capscrews prior to removal to aid in
installation.
REMOVE TWO NUTS (18), TWO WASHERS (19), TWO CAPSCREWS (20), TWO WASHERS
AND STIFFENER (22).
(21),
8-3
