TM 9-2320-363-34-1
Use general cleaning methods to clean all parts (page 2-30).
1.
INSPECT ALL PARTS FOR WEAR OR DAMAGE.
2.
APPLY LIGHT FILM OF OIL ON YOKE.
1.
APPLY LUBRICATING OIL TO NEW OIL SEAL (5) AND INSTALL OIL SEAL (5).
NOTE
To tighten yoke nut, use torque multiplier and 250 lb-ft (339 N.m) capacity ratchet-end
torque wrench.
2.
USING YOKE HOLDER BAR, INSTALL YOKE (3), WASHER (2), AND NEW LOCK NUT (1) AND
DIFFERENTIAL SHAFT (4). TIGHTEN NUT TO 450-600 LB-FT (610-814 N.m).
NOTE
Follow-on Maintenance:
Install driveline (TM 9-2320-363-20).
Fill axle with oil (TM 9-2320-363-20).
Change 1
5-39
