TM 9-2320-363-34-1
P T O W I R I N G H A R N E S S R E P L A C E M E N T
This task covers: a. Removal b. Cleaning
c. Inspection d. installation
Applicable Configuration:
All except M915A2
Tools and Special Equipment:
Tool Kit, SC 5180-90-CL-N05
References:
TM 9-2320-363-20
Equipment Condition:
Reference
Condition Description
TM 9-2320-363-20
Batteries Disconnected
N O T E
l
Wiring harness and leads are secured in place by clips, wire ties, and cushion clamps.
l
Only remove hardware securing harness lead to be removed.
l
Tag all connectors and leads prior to removal to aid during installation.
REMOVE PTO WIRING HARNESS USING ILLUSTRATION AND TABLE AS A GUIDE.
Use general cleaning methods to clean all parts (page 2-30).
Inspect all parts for wear or damage.
N O T E
l
Wiring harness and leads are secured in place by clips, wire ties, and cushion clamps.
l
Make sure harness is secure and all hardware is tight.
INSTALL PTO WIRING HARNESS USING ILLUSTRATION AND TABLE AS A GUIDE.
NOTE
Follow-on Maintenance:
Connect batteries (TM 9-2320-363-20).
4-47.6
Change 1
