TM 9-2320-363-34-1
C T I S W I R I N G H A R N E S S R E P L A C E M E N T
This task covers:
a. Removal b. Cleaning
c. Inspection d. Installation
Applicable Configuration:
M917A1 and M917A1 w/MCS
Tools and Special Equipment:
Tool Kit, SC 5180-90-CL-N26
Equipment Condition:
Reference
Condition Description
TM 9-2320-363-20
Batteries Disconnected
N O T E
l
Wiring harness and leads are secured in place by wire ties, cushion clamps, and screw
terminals.
l
Only remove hardware securing harness lead to be removed.
l
Tag all connectors and leads prior to removal to aid during installation.
DISCONNECT AND REMOVE CTIS WIRING HARNESS USING ILLUSTRATION AND TABLE AS A
GUIDE.
Use general cleaning methods to clean all parts (page 2-30).
Inspect all parts for wear or damage.
N O T E
l
Wiring harness and leads are secured in place by wire ties, cushion clamps, and screw
terminals.
l
Make sure harness is secure and all hardware is tight.
INSTALL AND CONNECT CTIS WIRING HARNESS USING ILLUSTRATION AND TABLE AS A GUIDE.
4-47.4
Change 1
