TM 9-2320-363-34-1
S T A R T E R S O L E N O I D R E P L A C E M E N T
This task covers:
a. Removal b. Cleaning c. Inspection d. Installation
Tools and Special Equipment:
References:
Shop Equipment, SC 4910-95-CL-A31
TM 9-2320-363-20
Tool Kit, SC 5180-90-CL-N05
Equipment Condition:
Materials/Parts:
Reference
Washer, Lock
P/N Z0930-78423
Condition Description
TM 9-2320-363-20
Starter Removed
Adhesive-Sealant
Appendix B, Item 3
1.
REMOVE NUT (1), LOCK WASHER (2), AND WIRE (3) FROM STARTER SOLENOID (4). DISCARD
LOCK WASHER.
CAUTION
Preheating may be required to remove nut without damaging plastic base.
2.
3.
REMOVE NUT (5) FROM STARTER SOLENOID (4).
4.
5.
HOLD NUT (6) ON STARTER MOTOR (7) AND REMOVE NUT (8) AND JUMPER (9) FROM STUD
(10).
REMOVE TWO SCREWS (11).
PULL STARTER SOLENOID (4) AWAY FROM HOUSING (12) AND ROTATE SO MOUNTING
BRACKET (13) FACES AWAY FROM STARTER MOTOR (7).
6.
REMOVE SPOOL (14) FROM SHIFT FORK (15).
NOTE
It may be necessary to use soft-jawed vise to hold solenoid plunger for removal
of spool.
7.
REMOVE SPOOL (14) AND BOOT (16) FROM SOLENOID PLUNGER (17).
Use general cleaning methods to clean all parts (page 2-30).
4-48
