TM 9-2320-363-34-1
ROCKER ARM ASSEMBLIES REPLACEMENT (CONT)
C A U T I ON
Do not expand retaining clip more than 0.61 in. (15.50 mm) when removing
intake valve button. To do so could result in damage to equipment.
6.
HOLD ADJUSTING SCREW (9) AND WITH VALVE BUTTON EXPANDER (10) SPREAD LEGS OF
RETAINING CLIP (11) AND REMOVE INTAKE VALVE BUTTON (12).
7.
REMOVE RETAINING CLIP (11) FROM THREADED END OF ADJUSTING SCREW (9).
8.
USING PIN PUNCH,
(7). PRY TWO CUP
PUNCH HOLE IN TWO CUP PLUGS (13) AT ENDS OF ROCKER ARM SHAFT
PLUGS (13) FROM SHAFT (7). DISCARD CUP PLUGS.
3-186
