TM 9-2320-363-34-1
11.
12.
13.
14.
C A U T I ON
Camshaft should be held in place while installing camshaft drive gear bolt to
prevent disengaging camshaft dowel from drive gear hub.
COAT THREADS AND UNDERSIDE HEAD OF CAMSHAFT DRIVE GEAR BOLT (15)
INTERNATIONAL COMPOUND N0.2. AND INSTALL BOLT HAND-TIGHT.
WITH
NOTE
After inserting shoe of camshaft drive gear retaining tool thru access hole of
camshaft drive gear, it may be necessary to bar engine over slightly to aline bolt
holes in retaining tool with bolt holes in drive gear access cover.
INSTALL CAMSHAFT DRIVE GEAR RETAINING TOOL (16) ON GEAR HOUSING (17) ENGAGING
ONE OF ACCESS HOLES (18) IN CAMSHAFT DRIVE GEAR (19). INSTALL TWO BOLTS (20) IN
RETAINING TOOL AND GEAR HOUSING.
TIGHTEN
REMOVE
CAMSHAFT DRIVE GEAR BOLT (15) TO 225-257 LB-FT (305-348 N.m).
TWO BOLTS (20) AND CAMSHAFT DRIVE GEAR RETAINING TOOL (16).
3-179
