TM 9-2320-363-34-1
CAMSHAFT AND BEARINGS REPLACEMENT (CONT)
NOTE
If new bearings are installed, replace upper and lower bearing shells as sets.
Note position of oil holes and locating tangs.
1.
INSTALL SEVEN LOWER BEARING SHELLS (1) IN CYLINDER HEAD AND LUBRICATE CAMSHAFT
BEARING SHELLS (1) WITH CLEAN ENGINE LUBRICATING OIL.
2.
INSTALL TWO UPPER CAMSHAFT BEARING SHELLS (2) IN
1 AND NO. 7. LUBRICATE CAMSHAFT BEARING SHELLS (2)
OIL.
CAMSHAFT BEARING
WITH CLEAN ENGINE
CAPS (3) NO.
LUBRICATING
3-174