TM 9-2320-363-20-1
1. Disconnect the ABS harness assembly from the
ECU under the passenger’s seat (page 4-296)
and connect the ABS harness assembly’s 35-pin
connector to the breakout box.
NOTE
Ignition switch must be turned on for all troubleshooting tests to provide power to Pro-Link. Do
not turn off ignition switch during testing.
2.
Connect the ABS data cable connector to _
Pro-Link reader and turn on the vehicle’s ignition.
Pm-Link will display the copyright screen for
several seconds and then request control data
from the ECU.
3-100.2
Change 2
