TM 9-2320-363-10
3-9.
WHEEL AND TIRE ASSEMBLY REPLACEMENT (ALL
EXCEPT M917A1 AND M917A1 W/MCS (Con’t).
Use caution when lifting or handling wheel and tire
assembly. It is heavy and could cause injury if improp-
erly lifted or if it falls on you.
NOTE
Wheel nuts on left side of vehicle are left hand
threads (turn right to loosen, turn left to tighten).
Wheel nuts on right side of vehicle are right hand
threads (turn left to loosen, turn right to tighten).
Valve stems on inner and outer rear tires should be
positioned 180° apart.
(2)
If replacing inner rear tire, position wheel and tire assembly
on wheel hub and install and handtighten wheel nuts.
(3)
For front or outer rear tire, position wheel and tire assembly
on wheel hub and install and handtighten wheel nuts.
(4)
Lower and remove jack.
3-26
