TM 9-2320-363-10
3-8.
OPERATION OF SPARE WHEEL AND TIRE ASSEMBLY
CARRIER (Con’t).
(4)
For M915A2, M917A1, and M917A1 w/MCS, support spare
wheel and tire assembly (6) and remove wheel clamp plate (7). For M916A1 and
M916A2, support spare wheel and tire assembly (6) and disengage D-ring (4) on
upper end of support strap (8).
(5)
is lowered to ground.
Repeat steps (2) and (3) until spare wheel and tire assembly
b.
Install Spare Wheel and Tire Assembly on Carrier.
(1) For M915A2, M917A1, and M917A1 w/MCS, secure hoist
cable (3) by inserting wheel clamp plate (7) through wheel opening.
(2)
For M916A1 and M916A2, wrap support strap (8) around
spare wheel and tire assembly (6) and attach D-ring (4) to hook on frame rail.
(3)
Turn gear shaft (1) clockwise until spare wheel and tire
assembly (6) is raised to stowed position.
(4)
Engage pawl (2) on gear shaft (1).
(5)
Install two nuts (5).
3-22
