TM 9-2320-302-34
0011 00-1
FRONT ENGINE MOUNT ADAPTER AND SUPPORT REPLACEMENT
0011 00
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Maintenance Level
Direct Support
Tools and Special Tools
Tool kit, general mechanic’s (Item 132, WP 0126 00)
Jack, hydraulic (Item 73, WP 0126 00)
Trestles (Item 135, WP 0126 00)
Materials/Parts
Nut, lock (P/N MS51922-57)
Personnel Required
Two
Equipment Condition
Front ABS quick-release valve removed (TM 9-2320-
302-20)
Front crossmember removed (WP 0096 00)
Vibration damper removed (WP 0020 00)
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
REMOVAL
1.
Remove two lock nuts (1), washers (2), screws (3), washers (4), isolators (5), and sleeves (6) from front engine mount
adapter (7). Discard lock nuts.
4
3
7
5
2
6
1
