TM 9-2320-302-34
0010 00-30
POWER PACK REPLACEMENT - CONTINUED
0010 00
INSTALLATION - CONTINUED
46.
Install plate (19) and bracket (22) with washer (21) and screw (20).
47.
Install two wires (18) and cable (17) on plate (19) with washer (16) and nut (15).
48.
Connect two wires (14) to starter solenoid (11) with washer (13) and nut (12).
49.
Connect four wires (10) and cable (9) to starter solenoid (11) with washer (8) and nut (7).
50.
Connect three wires (5), ground strap (4), and cable (3) to starter (6) with washer (2) and nut (1).
51.
Install transmission rear mount (WP 0070 00).
52.
Connect driveline (TM 9-2320-302-20).
53.
Install transmission oil fill tube (TM 9-2320-302-20).
54.
Connect transmission wiring harness (TM 9-2320-302-20).
55.
Connect transmission oil cooler lines (TM 9-2320-302-20).
56.
Install oil sampling valves (TM 9-2320-302-20).
57.
Install fender extensions (TM 9-2320-302-20).
58.
Install alternator and alternator adjusting rod (TM 9-2320-302-20).
59.
Install air conditioner compressor (WP 0117 00).
60.
Install alternator/air conditioner belt (TM 9-2320-302-20).
61.
Install air cleaner, pre-cleaner, and duct assembly (TM 9-2320-302-20).
62.
Install air intake tubes, hoses, and clamps (TM 9-2320-302-20).
22
14
13
12
19
1817
1615
4
3
2
2
5
6
2120
78 910
10
11
